Danfoss ECL Comfort 310 Operating Manual page 49

Operating Guide
3.4 Monitoring temperatures and system components
This section describes the function in general for the ECL Comfort
210 / 296 / 310 series. The shown displays are typical and not
application related. They might differ from the displays in your
application.
DHW circuit
The overview display in the DHW circuit ensures a quick overview
of the actual and (desired) temperatures as well as the actual state
of the system components.
Display example (heat exchanger):
50 °C
Flow temperature
(50)
Desired flow temperature
- -
Return temperature: sensor not connected
(30) Return temperature limitation
Input overview
Another option to get a quick overview of measured temperatures
is the 'Input overview' which is visible in the common controller
settings (how to enter the common controller settings, see
'Introduction to common controller settings' . )
As this overview (see display example) only states the measured
actual temperatures, it is read-only.
Danfoss District Energy
ECL Comfort 310, application P318
Display example with heat exchanger:
VI.JM.Q3.02
DEN-SMT/DK 49