Danfoss ECL Comfort 310 Operating Manual page 82

Operating Guide
MENU > Event > Charge T
MENU > Event > DHW flow T
Event priority 21
Circuit
All
The event number and priority possibilities.
The event can be activated if the controlled temperature S3 has been too
low for more than the set "Delay" time.
* See Appendix "Parameter ID overview"
0:
Log of event not active
1:
Log of event in list
2:
Log of event in list and notice (letter symbol in display)
3:
Log of event in list and alarm (bell symbol in display and
activation of alarm output)
Parameters indicated with an ID no. like "1x607" mean a universal
parameter.
x stands for circuit / parameter group.
82 DEN-SMT/DK
ECL Comfort 310, application P318
9021
Setting range Factory setting
* *
VI.JM.Q3.02
Danfoss District Energy