Inserting The Ecl Application Key - Danfoss ECL Comfort 310 Operating Manual

Operating Guide

2.6 Inserting the ECL Application Key

2.6.1 Inserting the ECL Application Key
The ECL Application Key contains
• the application and its subtypes,
• currently available languages,
• factory settings: e.g. schedules, desired temperatures,
limitation values etc. It is always possible to recover the factory
settings,
• memory for user settings: special user / system settings.
After having powered-up the controller, different situations might
be existing:
1. The controller is new from the factory, the ECL Application Key
is not inserted.
2. The controller already runs an application. The ECL Application
Key is inserted, but the application needs to be changed.
3. A copy of the controllers settings is needed for configuring
another controller.
User settings are, among others, desired room temperature, desired
DHW temperature, schedules, heat curve, limitation values etc.
System settings are, among others, communication set-up, display
brightness etc.
Danfoss District Energy
ECL Comfort 310, application P318
ECL Comfort 210 / 310
ECL Comfort 210 / 310
VI.JM.Q3.02
DEN-SMT/DK 31