Log - Danfoss ECL Comfort 210 Installation Manual

Installation Guide ECL Comfort 210 / 310, application A237 / A337

7.5 Log

The log function (temperature history) allows you to monitor the
logs of today, yesterday, the past 2 days as well as the past 4 days
for the connected sensors.
There is a log display for the relevant sensor, showing the measured
temperature.
The log function is only available in the 'Common controller
settings'.
Example 1:
1 day log for yesterday showing the development in outdoor
temperature during the past 24 hours.
Example 2:
Today's log for the actual heating flow temperature as well as the
desired temperature.
Example 3:
Yesterday's log for the DHW flow temperature as well as the desired
temperature.
Danfoss District Energy
110 DEN-SMT/DK VI.LG.R1.02