B – Command Line Interface
Show Config Command
Show Config Command
Displays switch, port, alarm threshold, security, and zoning for the current
configuration.
Authority
None
Syntax
show config
port [port_number]
security
switch
threshold
zoning
Keywords
port [port_number]
Displays configuration parameters for the port number given by [port_number].
Ports are numbered beginning with 0. If [port_number] is omitted, all ports are
specified.
security
Displays the security database Autosave parameter value.
switch
Displays configuration parameters for the switch.
threshold
Displays alarm threshold parameters for the switch.
zoning
Displays zoning configuration parameters for the switch.
Examples
The following is an example of the Show Config Port command:
SANbox2 #> show config port 3
Port Number: 3
------------
AdminState
LinkSpeed
PortType
SymbolicName
ALFairness
DeviceScanEnabled
ForceOfflineRSCN
ARB_FF
InteropCredit
ExtCredit
FANEnabled
LCFEnabled
MFSEnabled
MSEnabled
B-72
Offline
Auto
GL
Port3
False
True
False
False
0
0
True
False
True
True
D
59021-07 A