Sanbox2 Installation Disk - Linux Installation; Sanbox2 Installation Disk - Solaris Installation; Configure The Switch - Qlogic SANbox2-16 Installation Manual

D
4.2.10

SANbox2 Installation Disk - Linux Installation

To install the SANbox Manager application on Linux from the SANbox2 Installation
Disk, do the following:
1. Close all programs currently running, and insert the SANbox2 Installation
Disk into the management workstation CD-ROM drive.
2. Open the File Manager and double-click on the CD-ROM icon.
3. Double click the SANbox_Manager folder, then double click the Linux folder.
4. Double click the executable file and follow the SANbox Manager installation
instructions.
4.2.10.1

SANbox2 Installation Disk - Solaris Installation

To install the SANbox Manager application on Solaris from the SANbox2
Installation Disk, do the following:
1. Close all programs currently running, and insert the SANbox2 Installation
Disk into the management workstation CD-ROM drive.
2. Open a terminal window. If the disk isn't already mounted, enter the
following command:
3. Move the directory on the disk that contains the executable. Enter the
following command:
4. Run the executable and follow the SANbox Manager installation instructions.
Enter the following command:
4.2.11

Configure the Switch

Do the following to configure a switch using the SANbox Manager application.
Refer to the SANbox2-8c/16 Switch Management User's Guide for more
information about configuring a switch. You can also configure the switch using
the Command Line Interface. Refer to
more information.
1. Connect to the switch using an Ethernet connection and run SANbox
Manager.
2. Open the Fabric menu and select Add Fabric to open the Add a New Fabric
window.
59021-07 A
mount /mnt/cdrom
cd cdrom/cdrom0/sanbox~1/solaris
pkgadd -d sol_pkg
Appendix B Command Line Interface
4 – Installation
Installing a Switch
for
4-15