Sansurfer Management Suite Disk - Solaris Installation - Qlogic SANbox2-16 Installation Manual

D
b.
c.
d.
2. On the SANsurfer Management Suite start page, choose the SANbox
Switch Software button.
3. On the SANbox Switch Software page, scroll to the SANbox2 (2Gb) Series
area.
4. In the Linux column, choose the SANbox Manager link to open the Save As
window.
5. Enter a path name to save the sansurfer_linux_install.bin file, and choose
the Save button.
6. Open a terminal window for the directory in which the
sansurfer_linux_install.bin file was saved, and enter the following
command and press the Enter key:
7. Enter the following command:
8. Press the Enter key, and follow the SANbox Manager installation
instructions.
4.2.8

SANsurfer Management Suite Disk - Solaris Installation

To install the SANbox Manager application on Solaris from the SANsurfer
Management Suite CD-ROM, do the following:
1. Close all programs currently running, and insert the SANsurfer Management
Suite Disk into the management workstation CD-ROM drive. If the
SANsurfer Management Suite start page does not open in your default
browser, do the following:
a.
b.
59021-07 A
Mount the CD-ROM. From a shell prompt, enter the following
command:
mount /mnt/cdrom
Execute your web browser to view the Start_Here.htm document
using one of the following commands:
$mozilla file:/mnt/cdrom/Start_Here.htm
or
$netscape file:/mnt/cdrom/Start_Here.htm
The SANsurfer Management Suite start page opens in your default
browser.
chmod +x sansurfer_linux_install.bin
./sansurfer_linux_install.bin
Right-click the to open the Workshops Menu.
Point to and select Files, then select File Manager.
4 – Installation
Installing a Switch
4-13