Verifying The User Accounts And Rbac Configuration; Configuring User Accounts Default Settings For The User Accounts And Rbac - Cisco Nexus 3548 series Configuration Manual

Configuring User Accounts and RBAC
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7

Verifying the User Accounts and RBAC Configuration

Use one of the following commands to verify the configuration:
Command
show role [role-name]
show role feature
show role feature-group
show startup-config security
show running-config security [all]
show user-account
Configuring User Accounts Default Settings for the User
Accounts and RBAC
The following table lists the default settings for user accounts and RBAC parameters.
Command or Action
switch# configure terminal
switch(config) # role name role-name
switch(config-role )# vlan policy deny
switch(config-role-vlan # permit vlan vlan-list
switch(config-role-vlan) # exit
(Optional) switch# show role
(Optional) switch# copy running-config
startup-config
Purpose
Displays the user role configuration
Displays the feature list.
Displays the feature group configuration.
Displays the user account configuration in the startup configuration.
Displays the user account configuration in the running configuration.
The all keyword displays the default values for the user accounts.
Displays user account information.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x

Verifying the User Accounts and RBAC Configuration

Purpose
Enters global configuration mode.
Specifies a user role and enters role
configuration mode.
Enters role VLAN policy configuration mode.
Specifies a range of VLANs that the role can
access.
Repeat this command for as many VLANs as
needed.
Exits role VLAN policy configuration mode.
Displays the role configuration.
Saves the change persistently through reboots
and restarts by copying the running
configuration to the startup configuration.
209