Table of Contents
Advertisement
DataViewer
DataViewer is an enhanced terminal emulation program that facilitates analysis of RS-232
and USB communication with the MPS 601. The software allows users to send commands
to a device and view the responses in ASCII or hexadecimal format. Command and
response logs can be saved in text or HTML format.
DataViewer is available at www.extron.com. Enter DataViewer in the search engine
to locate the program. Download the installation file and load the program on the PC
connected to the MPS 601.
To connect via RS-232:
1.
2.
3.
4.
5.
You are now ready to enter commands.
See the DataViewer help file for more information
about program operation.
To connect via USB:
1.
2.
3.
4.
5.
You are now ready to enter commands.
See the DataViewer help file for more information
about program operation.
Click the desktop Dataviewer icon.
The Communication Setup dialog box
opens.
Select the RS-232 tab (
1
rear panel RS-232 port.
In the Port Configuration panel (
configure the port settings (shown with the
correct protocol settings at right).
To automatically connect to the MPS 601,
select Connect on startup (
Click OK (
) to start using the program.
4
Click the desktop Dataviewer icon.
The Communication Setup dialog box opens.
Select the USB tab (
) when using the front
1
panel Config port.
Choose Extron USB Device from the
drop-down list (
).
2
To automatically connect to the MPS 601, select
Connect on startup (
3
Click OK (
) to start using the program.
4
1 1
2 2
) when using the
),
2
).
3
3 3
4 4
).
MPS 601 • Reference Information
Extron USB Device 0
48
Advertisement
Table of Contents
