Table of Contents
Advertisement
DataViewer
DataViewer is an enhanced terminal emulation program that facilitates analysis of RS-232,
USB, and TCP/IP communication with Extron devices. The software allows users to send
commands to a device and view the responses in ASCII or hexadecimal format. Command
and response logs can be saved in text or HTML format.
DataViewer is available at www.extron.com. Enter
to locate the program. Download the installation file and load the program on the PC
connected to the MPS 602.
Starting the Dataviewer program
1.
2.
3.
4.
You are now ready to configure DataViewer or to
begin entering commands.
Use the DataViewer help file for more information
program operation.
To run DataViewer control program, click the
desktop icon.
The
Communications Setup
a.
Select the
tab (shown with the
RS-232
correct protocol settings at right) when
using the rear panel RS-232 port,
-or-
b.
Select the
tab when using the front
USB
panel Config port.
Select the startup options:
a.
For RS-232, configure the protocol settings,
then click
to always use this port and
OK
settings when starting the DataViewer
program.
b.
For USB, choose
Extron USB Device
drop-down list and click
To automatically connect to the MPS 602,
select
Auto-connect on startup
Click
to start using the program.
OK
DataViewer
dialog box opens.
in the
.
OK
.
MPS 602 • Reference Information
in the search engine
Extron USB Device
35
Advertisement
Table of Contents
