Table of Contents
Advertisement
Starting the Software
Start the Extron FOX Extenders Control Program as follows:
1.
2.
3.
Using the Software
For more configuration and control details, see the FOX Extenders Control Program Help
File for configuration and control details. Open the file using one of the following methods:
•
•
•
The main screen opens (see figure 9 on page 23).
Open the FOX Extenders Control Program. The
appears.
Figure 8.
Communication Setup Window Connection Methods
Select the desired connection method.
To connect the software to the device through the rear panel Remote RS-232
•
connector, click the
RS232
drop-down list (see the left side of figure 8).
To connect the software to the device through the front panel USB connector, click
•
the
tab and select the Extron USB device from the
USB
drop-down list (see the right side of figure 8).
Click the
button. The FOX Extenders Control Program window appears.
Connect
NOTE: Some controls and displays are available only when connected to specific
devices.
Once the FOX Extenders Control Program is open, press the <F1> key on the
keyboard.
Once the FOX Extenders Control Program is open, select
menu.
From the Windows Start Menu, select
Control Program folder.
FOX T USW 203 Universal Switcher • FOX Extenders Control Program
Communication Setup
tab and select the desired port from the
Contents
FOX Extenders Help
dialog box
Port
Extron USB Device
from the
Help
from the FOX Extenders
22
Advertisement
Table of Contents
