Icom id-rp2 Instruction Manual page 44

7
REPEATER SETTINGS
D
ID-RP2C utility screen— continued
!4 Use Gateway (gateway usage)
Selects the gateway connection capability with this
local repeater ON and OFF.
Click the box next to "Use Gateway" when you
want to allow a gateway connection.
• The check mark (4) appears.
Without the check mark (4) set, an Un-connect-
able command is automatically sent when the
packet is received through a gateway.
!5 IP Address
Enter the gateway IP address.
!6 Port (port number)
Enter the gateway UDP port number.
!7 Monitor (monitor usage)
Select to monitor the local area call or not.
Click the box next to "Monitor" to monitor the call.
• The check mark (4) appears.
!8 IP Address
Enter the gateway IP address to send the local
area call voice and data packets to.
!9 Port (port number)
Enter the gateway UDP port number to send the
local area call voice and data packets to.
q q q w
q e q r
q t
q y
q
u
q
i
q
o
q
! 0
q
! 1
q ! 3
q
! 2
(Default: 172.16.0.20)
(Default: 21000)
q
! 4
q
! 7
@0 IP Address
Enter the local repeater IP address.
@1 Port (port number)
Enter the repeater UDP port number.
@2 Subnet Mask
Enter the subnet mask of the network if the re-
peater is connected to the existing network
.
LAN)
If a PC is connected, set the same subnet mask
of the PC for the repeater and server (gateway or
local server) settings.
@3 Def. Gateway
(Default gateway)
Set the default gateway address of the network
that to be connected to, if connecting to another
network through the repeater.
And, set the same default gateway address of the
local server, if the local server has a different net-
work setting from the repeater network setting.
41
q
! 5
q
! 6
q
! 8
q ! 9
q
@0
q
@1
q
@2
q @3
(Default: 172.16.0.1)
(Default: 20319)
(e.g.,