Icom id-rp2 Instruction Manual page 27

!0 The "Browse for driver software on your computer"
will appear. Click [Browse...].
!1 Select the "DRIVER" folder in the application CD,
or the unzip driver file (downloaded driver file), and
then click [OK].
Select
Click
!2 The "Browse for driver software on your computer"
will appear again.
Click [Next] to start the installation of "ID-RP2C
SERVICE 1."
!3 When the Windows Security screen appears, click
[Install] to continue.
Click
!4 After the installation is completed, "Windows has
successfully updated your driver software" will ap-
pear as shown below. Click [Close].
!5 The dialog "Device driver software was not success-
fully installed" will appear again.
!6 Repeat i to !4 , to install the "ID-RP2C SERVICE 1"
driver software.
!7 Eject the CD from the CD drive, and then restart the
PC.
Click
24
DRIVER INSTALLATIONS
Click
Click
5