Antenna Assembling (Not Available In European Countries); Element Arm; D Ah-106 - Icom id-rp2 Instruction Manual

4
INSTALLING AND CONNECTING
Antenna assembling
■
D AH-106
Unscrew

Element arm

Unscrew
Elevation angle bracket
Element arm
Elevation angle
sub-bracket
Elevation angle
bracket
R DANGER!
Antenna installation is intended for
professional installation only. We are not responsi-
ble for any building breakage, any damage resulting
from a drop of the antenna from a high place or un-
stable site or resulting from any personal injury nor
any accident in any other cases. Be sure to consult
an expert engineer for installations.
q Remove the pole clamp that attached to the eleva-
tion angle bracket.
w Unscrew 4 bolts from the elevation angle bracket.
e Attach the element-arm onto the reflector.
NOTE: Check the orientation.
Top
Reflector
Bottom
r Attach the elevation angle and elevation angle sub-
brackets, as illustrated in the diagram to the left.
Fix the angles using with the bolts that are un-
screwed at steps w and are attached with the el-
evation angle sub-bracket.
NOTE: Select the suitable screw hole position
that the point where the suitable parabolic an-
tenna beams angle is provided with the eleva-
tion angle sub-bracket adjustment.
11
(Not available in European countries)
Reflector
Elevation
base angle bracket
Element arm
+ Continue to the next page.