Status Indicators - Datalogic TC1100 Reference Manual

1
3)
Modify the desired parameters in one or more sections following the
procedures given for each group.
4)
Read the Exit and Save Configuration code ONCE, available at the top of
each page of configuration.
Reference notes describing the operation of the more complex parameters are given
in chapter 5.
1.2

STATUS INDICATORS

The reader has two LED indicators signaling several operating conditions which are
described in the tables below.
TC1100 Scanner
POWER ON / LED2
ON
OFF
GOOD READ / LED1 Meaning
ON
OFF
2
POWER UP
Meaning
Power supply ON
Power supply OFF
DATA ENTRY
Good read (LED1 will remain ON until status changes)
Miss read
Led2 Led1
TC1100 Scan Engine
TC1100