Header - Datalogic TC1100 Reference Manual

Enter configuration
no header
two character header
four character header
six character header
eight character header
After selecting one of the desired Header codes, read the character(s) from the HEX table.
Example:
For more details about default and WEDGE Interface Extended Keyboard values, see pars. 5.3.1 and 5.3.2.
64
DATA FORMAT
Valid characters for all readers are in the range:
four character header
+ 41 + 42 + 43 + 44 = Header ABCD
H
EADER
Exit and Save Configuration
one character header
three character header
five character header
seven character header
00-FE