Caps Lock; Num Lock - Datalogic TC1100 Reference Manual

Enter configuration
Select the appropriate code to match your keyboard caps lock status.
Note: For IBM AT and PC Notebook interface selections, the caps lock status is
automatically recognized, therefore this command is not necessary.
This selection is used together with the Alt Mode interface selection for AT or Notebook PCs.
It changes the way the Alt Mode procedure is executed, therefore it should be set as follows:
•
if your keyboard Num Lock is normally on use num lock unchanged
•
if your keyboard Num Lock is normally off use toggle num lock
In this way the device will execute the Alt Mode procedure correctly for your application.
48
WEDGE
C L
APS OCK
caps lock OFF
caps lock ON
N L
UM OCK
toggle num lock
num lock unchanged
Exit and Save Configuration