Emerson Digitax ST User Manual page 49

Safety Product Mechanical
Information information installation
Key:
Coding
{X.XX} Copied advanced parameter
RW Read/write: can be written by the user
RO Read only: can only be read by the user
Bit 1 bit parameter: 'On' or 'OFF' on the display
Bi Bipolar parameter
Uni Unipolar parameter
Txt Text: the parameter uses text strings instead of numbers.
Filtered: some parameters which can have rapidly changing
FI values are filtered when displayed on the drive keypad for
easy viewing.
Destination: This parameter selects the destination of an
DE
input or logic function.
Rating dependent: this parameter is likely to have different
values and ranges with drives of different voltage and
current ratings. Parameters with this attribute will not be
RA
transferred to the destination drive by SMARTCARDs when
the rating of the destination drive is different from the
source drive and the file is a parameter file.
Not copied: not transferred to or from SMARTCARDs
NC
during copying.
PT Protected: cannot be used as a destination.
User save: parameter saved in drive EEPROM when the
US
user initiates a parameter save.
Power-down save: parameter automatically saved in drive
PS
EEPROM when the under volts (UV) trip occurs.
Digitax ST User Guide
Issue: 3
Electrical Getting Basic
installation started parameters
Attribute
www.controltechniques.com
Running the SMARTCARD
Optimization
motor Operation
Onboard Advanced Technical
Diagnostics
PLC parameters Data
UL listing
information
49