Emerson Digitax ST User Manual page 158

Safety Product Mechanical
Information information installation
SM-SLM parameters
Parameter
x.01 Solutions Module ID
x.02 Solutions Module software version
x.03 Speed
x.04 Revolution counter
x.05 Position
x.06 Fine position
x.07 Operating mode
x.08 Marker pulse received indicator
x.09 SLM converted flux offset
x.10 Encoder lines per revolution
x.11 SLM software version
x.12 SLM power-up delay
x.13 Not used*
x.14 Sequencer status
x.15 Not used*
x.16 Not used*
x.17 Not used*
x.18 Not used*
x.19 Feedback filter
x.20 Not used*
x.21 Not used*
x.22 Not used*
x.23 Not used*
x.24 Not used*
x.26 Autotune mode
x.27 Saving mode
x.28 Parameters transferred
Action the tuning and saving
x.29
parameters
x.30 Automatic basic drive set-up request
x.32 Not used*
x.33 Not used*
x.34 Not used*
x.35 Not used*
x.36 Not used*
x.37 Not used*
x.38 Not used*
x.39 Not used*
x.40 Not used*
x.41 Not used*
x.42 Not used*
x.43 Not used*
x.44 Not used*
x.45 Axis initialised
x.46 Not used*
x.47 Not used*
x.48 Not used*
x.49 Lock position feedback
x.50 Solutions Module error status**
Solutions Module software sub-
x.51
version
RW Read / Write RO Read only
FI Filtered DE Destination
* Some of the parameters which are not used will be introduced in scheduled product enhancement.
**See trip SLX.Er, SLM module category on page 193.
158
Electrical Getting Basic
installation started parameters
Range( )
0 to 499
0.0 to 99.99
±40,000.0 rpm
0 to 65,535 revolutions
16
0 to 65,535 (1/2 ths of a revolution)
32
0 to 65,535 (1/2 nds of a revolution)
HoSt (0), Enc.Only (1)
OFF (0) or On (1)
0 to 65,535
0 to 50,000
0.000 to 9.999
0.000 (0), 0.250 (1), 0.500 (2),
0.750 (3), 1.000 (4), 1.250 (5),
1.500 (6) s
0 to 16
0 (0), 1 (1), 2 (2), 4 (3), 8 (4), 16 (5) ms
0 to 4
0 to 2
0 to 2
OFF (0) or On (1)
0 to 1
OFF (0) or On (1)
OFF (0) or On (1)
0 to 255
0 to 99
Uni Unipolar Bi
NC Not copied RA
www.controltechniques.com
Running the SMARTCARD
Optimization
motor Operation
Default( )
HoSt (0)
OFF (0)
0.000
0.250 (1)
OFF (0)
OFF (0)
Bi-polar Bit Bit parameter
Rating dependent PT Protected
Onboard Advanced
Technical
PLC parameters
Data
RO Uni
RO Uni
RO Bi
RO Uni
RO Uni
RO Uni
RW Txt
RO Bit
0 RO Uni
1024 RW Uni
RO Uni
RW Txt
RO Uni
0 (0) RW Txt
0 RW Uni
0 RW Uni
0 RW Uni
RW Bit
0 RW Uni
RO Bit
RW Bit
RO Uni
RO Uni
Txt Text string
US User save
Digitax ST User Guide
UL listing
Diagnostics
information
Type
PT US
NC PT
FI NC PT
FI NC PT
FI NC PT
FI NC PT
US
NC
US
NC PT
US
NC PT
US
US
US
US
US
US
PT
PT
NC PT
NC PT
PS Power down save
Issue Number: 3