Web Server Settings; Operating Page "Inputs; Operating Page "Time Of Day/Date - Siemens OZW672.01 Commissioning Instructions

Notes
Time of day/date
Backup battery
Siemens
Building Technologies
2.5

Web Server settings

The "Home" menu is used to set the Web Server. The Web Server and then the
corresponding operating page are selected in secondary navigation.
· The settings depend on the user level.
· This section does not describe read-only data points.
2.5.1

Operating page "Inputs"

The operating page displays the state of data points "Fault input 1" and "Fault
input 2".
Path: Home > 0.5 OZW672... > Inputs
A description of the data points is available in Section 4.3.3 "Faults: Fault inputs
1...2".
Setting the fault inputs is described in Section 2.5.4.8 "Inputs".
2.5.2

Operating page "Time of day/date"

Path: Home > 0.5 OZW672... > Time of day/date
The clock has a backup battery for at least 72 hours. The clock continues to run
after power failure for the duration of the backup battery.
Both date and time are reset in case of an extended interruption.
· The time is corrected automatically if the time is synchronized to the master
clock on the LPB/BSB bus (see Section 2.5.4, LPB / BSB).
· Otherwise, both date and time must be newly set.
Data point
Time of day/date
Default val: 00:00 1.1.2005
Setting val: Time of day/date
Web Server OZW672... V6.0
Commissioning
Explanation, example
Set the current time and date.
Weekday is calculated automatically.
25 / 143
CE1C5712en
2015-10-13