Loading The System Configuration From The Aca - Hirschmann RS20 User Manual

Entering the IP Parameters
2.4 Loading the system
configuration from the ACA
The AutoConfiguration Adapter (ACA) is a device for
storing the configuration data of a device and
storing the device software.
In the case of a device becoming inoperative, the ACA makes it possible to
easily transfer the configuration data by means of a substitute device of the
same type.
When you start the device, it checks for an ACA. If it finds an ACA with a valid
password and valid software, the device loads the configuration data from
the ACA.
The password is valid if
the password in the device matches the password in the ACA or
the preset password is entered in the device.
To save the configuration data on the
(and on the ACA)").
Basic Configuration
Release 6.0 07/2010
2.4 Loading the system configuration
ACA(see on page 59 "Saving locally
from the ACA
39