Hirschmann RS20 User Manual page 278

Warning
When installing the device, make sure the ventilation slots re-
main unobstructed, as otherwise the device can overheat and
be damaged.
Note: When operating the device in environments with strong vibrations,
the device can be fastened with two additional brackets at the back of the
switch cabinet
ery.
Mounting the MACH 100 on the wall
Use the pre-mounted brackets included in the delivery as shown in the
following figure
Attach two additional brackets to the device (see on
„Accessories"), not included in the delivery) as shown in the following
figure (see fig.
Fasten the device by screwing the brackets to the wall.
Warning
When installing the device, make sure the ventilation slots re-
main unobstructed, as otherwise the device can overheat and
be damaged.
Figure 16: Vertical mounting on the wall
Note: The shielding ground of the connectable industrial twisted pair lines
is connected to the front panel as a conductor.
26
(see on page 38
(see fig. 16).
16).
„Accessories"), not included in the deliv-
(see on page 38
MACH 100
Release 07/09