Hirschmann RS20 User Manual page 38

Entering the IP Parameters 2.3 Entering the IP Parameters via Hi-
Discovery
Figure 11: HiDiscovery - assigning IP parameters
Note: When the IP address is entered, the device copies the local
configuration settings (see on page 53 "Loading/saving settings").
Note: For security reasons, switch off the HiDiscovery function for the device
in the Web-based interface, after you have assigned the IP parameters to the
device (see on page 50 "Web-based IP Configuration").
Note: Save the settings so that you will still have the entries after a restart
(see on page 53 "Loading/saving settings").
Basic Configuration
38
Release 6.0 07/2010