Loading Software Updates
Test stored images in flash memory
Select 3 to check whether the images of the software stored in the
flash memory contain valid codes.
Test stored images in USB memory
Select 4, to check whether the images of the software stored in the
ACA 21-USB contain valid codes.
Apply and store selection
Select 5 to confirm the software selection and to save it.
Cancel selection
Select 6 to leave this dialog without making any changes.
4.1.2
Starting the software
This menu item (Start Selected Operating System) of the system monitor
allows you to start the software selected.
4.1.3
Performing a cold start
This menu item (End (reset and reboot)) of the system monitor allows you to
reset the hardware of the device and perform a restart.
Basic Configuration
Release 6.0 07/2010
4.1 Loading the Software manually
from the ACA
67