Hirschmann RS20 User Manual page 88

Protection from Unauthorized Access
enable
show network mgmt-access
network mgmt-access add
network mgmt-access modify 2
ip 192.168.1.0
network mgmt-access modify 2
netmask 255.255.255.0
network mgmt-access modify 2
telnet disable
network mgmt-access modify 2
ssh disable
network mgmt-access add
network mgmt-access modify 3
ip 109.237.176.0
network mgmt-access modify 3
netmask 255.255.255.0
network mgmt-access modify 3
http disable
network mgmt-access modify 3
snmp disable
network mgmt-access modify 3
telnet disable
network mgmt-access status 1
disable
network mgmt-access
operation enable
show network mgmt-access
copy system:running-config
nvram:startup-config
88
6.4 Restricted Management Access
Switch to the Privileged EXEC mode.
Display the current configuration.
Create an entry for the IT network. This is given
the smallest free ID - in the example, 2.
Set the IP address of the entry for the IT network.
Set the netmask of the entry for the IT network.
Deactivate telnet for the entry of the IT network.
Deactivate SSH for the entry of the IT network.
Create an entry for the mobile phone network. In
the example, this is given the ID 3.
Set the IP address of the entry for the mobile
phone network.
Set the netmask of the entry for the mobile phone
network.
Deactivate http for the entry of the mobile phone
network.
Deactivate snmp for the entry of the mobile phone
network.
Deactivate telnet for the entry of the mobile phone
network.
Deactivate the preset entry.
Activates the function immediately.
Display the current configuration of the function.
Save the entire configuration in the non-volatile
memory.
Basic Configuration
Release 6.0 07/2010