Hirschmann RS20 User Manual page 48

Entering the IP Parameters 2.6 System Configuration via DHCP
Example of a DHCP configuration file:
# /etc/dhcpd.conf for DHCP Daemon
#
subnet 10.1.112.0 netmask 255.255.240.0 {
option subnet-mask 255.255.240.0;
option routers 10.1.112.96;
}
#
# Host berta requests IP configuration
# with her MAC address
#
host berta {
hardware ethernet 00:80:63:08:65:42;
fixed-address 10.1.112.82;
}
#
# Host hugo requests IP configuration
# with his client identifier.
#
host hugo {
#
option dhcp-client-identifier "hugo";
option dhcp-client-identifier 00:68:75:67:6f;
fixed-address 10.1.112.83;
server-name "10.1.112.11";
filename "/agent/config.dat";
}
Lines that start with a '#' character are comment lines.
The lines preceding the individually listed devices refer to settings that apply
to all the following devices.
The fixed-address line assigns a permanent IP address to the device.
For further information, please refer to the DHCP server manual.
Basic Configuration
48
Release 6.0 07/2010