Hirschmann RS20 User Manual page 224

Setting up the Configuration
Environment
A.2 Setting up a DHCP Server
with Option 82
On the CD-ROM supplied with the device you will find the software for a
DHCP server from the software development company IT-Consulting
Dr. Herbert Hanewinkel. You can test the software for 30 calendar days
from the date of the first installation, and then decide whether you want to
purchase a license.
To install the DHCP servers on your PC,
put the CD-ROM in the CD drive of your PC and
under Additional Software select "haneWIN DHCP-Server".
To carry out the installation, follow the installation assistant.
Start the DHCP Server program.
Figure 70: Start window of the DHCP server
Note: The installation procedure includes a service that is automatically
started in the basic configuration when Windows is activated. This service is
also active if the program itself has not been started. When started, the
service responds to DHCP queries.
224
A.2 Setting up a DHCP Server with
Option 82
Basic Configuration
Release 6.0 07/2010