Hirschmann RS20 User Manual page 150

Network Load Control
interface 1/1
vlan priority 3
exit
Assigning the VLAN Priority to the Traffic Classes
Select the
QOS/Priority:802.1D/p-Mapping dialog.
In the "Traffic Class" column, enter the desired values.
enable
configure
classofservice dot1p-
mapping 0 2
classofservice dot1p-
mapping 1 2
exit
show classofservice dot1p-
mapping
User Priority
-------------
0
1
2
3
4
5
6
7
Always assign the port priority to received data packets
(PowerMICE, MACH 104, MACH 1040 and MACH 4000)
enable
configure
interface 1/1
no classofservice trustvlan
priority 1
exit
150
Switch to the Interface Configuration mode of
interface 1/1.
Assign port priority 3 to interface 1/1.
Switch to the Configuration mode.
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Assign traffic class 2 to VLAN priority 0.
Also assign traffic class 2 to VLAN priority 1.
Switch to the privileged EXEC mode.
Display the assignment.
Traffic Class
-------------
2
2
0
1
2
2
3
3
Switch to the Privileged EXEC mode.
Switch to the Configuration mode.
Switch to the Interface Configuration mode of
interface 1/1.
Assign the "no trust" mode to the interface. Set the
port priority to 1.
Switch to the Configuration mode.
8.4 QoS/Priority
Basic Configuration
Release 6.0 07/2010