Dimension Drawings - Hirschmann RS20 User Manual

FAULT
Figure 13: 2-pin terminal block
Note: Please note the electrical ratings for the signal contact
page 35 „General technical
Note: Relevant for North America:
The tightening torque of the terminal block screws is 0,34 Nm (3 lb in).
Mount the terminal block for the signal contact on the front of the
device using the screw locking. Check whether the terminal block is
mounted correctly and screwed on.
2.1.5

Dimension drawings

MACH 100
Release 07/09
data").
465,9
482,6
(see on
23