Loading The System Configuration From The Aca - Hirschmann PowerMICE User Manual

Entering the IP Parameters
2.4 Loading the system
configuration from the ACA
The AutoConfiguration Adapter (ACA) is a device for

for saving the device configuration data and

saving the device software.
If a device becomes inoperative, the ACA allows the configuration data to be
re-applied to a replacement device of the same type.
When the device is started, it checks to see whether a ACA is present. If an
ACA is present with a valid password and valid software, the device loads the
configuration data from the ACA.
The password is valid if

the entered password matches the password in the ACA, or
 the preset password in the device is entered.
To save the configuration data in the ACA, see
ACA)" on page 64.
UM Basic Configuration L3P
Release 7.1 12/2011
2.4 Loading the system configuration
"Saving locally (and on the
from the ACA
39