Installing The Sfp Modules - Hirschmann RS20 User Manual

Figure 9: MACH 100 device equipped with media modules
1 - Media module 1
2- Media module 2
To attach a media module, first remove the 2 screws on the protective
cover of the media module slot and remove the protective cover.
Plug the media module into the desired slot.
Fasten the 2 screws at the corners of the media module.
Fit the media modules in sequence from left to right.
2.1.3

Installing the SFP modules

Fast ETHERNET
fiberoptic SFP module
Figure 10: MACH 100 device, front view
1 - Two SFP slots
To attach an SFP module, first remove the protective cap over the socket.
Push the SFP module with the lock closed into the socket until it latches
audibly in place.
Note: Only use Hirschmann SFP modules
MACH 100
Release 07/09
Gigabit ETHERNET
fiberoptic SFP module
1
1
(see page 38
2
„Accessories").
21