Basic Settings
2.5.1 Loading the configuration
In the "Load" frame, you have the option to
load a configuration saved on the device,
load a configuration stored under the specified URL,
load a configuration stored on the specified URL and save it on the
device,
load a configuration saved on a PC in binary format.
If you change the current configuration (for example, by switching a port off),
the load/save symbol in the menu area changes from a disk symbol into a
yellow triangle. After saving the configuration, the load/save symbol changes
back into the disk symbol.
2.5.2 Saving the configuration
In the "Save" frame, you have the option to
save the current configuration on the device,
save the current configuration in binary form in a file under the specified
URL,
save the current configuration in binary form on the PC,
Note: The loading process started by DHCP/BOOTP
work")
shows the selection of "from URL & save local" in the "Load" frame. If
you get an error message when saving a configuration, this could be due to
an active loading process. DHCP/BOOTP only finishes a loading process
when a valid configuration has been loaded. If DHCP/BOOTP does not find
a valid configuration, then finish the loading process by loading the local con-
figuration in the "Load" frame.
RM Web L2B
Release 4.2 07/08
2.5 Load/Save
(see on page 20 „Net-
27