Analog Input Control - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
Common Items
1.1.1

Analog input control

Input the voltage/current signal from a flowmeter, pressure sensor, etc. to the PLC to monitor the condition of
the workpiece or equipment.
Output the current or voltage
data from the flux rate or the
pressure.
→ To determine whether or not a unit can be connected to the PLC, refer to Chapter 3 "System
FX Series Analog input products
3UC
• FX -4AD
3UC
FX Series Analog input products
3U
• FX -4AD
3U
• FX -4AD-ADP
3U
FX Series Analog input products
3G
• FX -2AD-BD
3G
Other Series Analog input products
• FX -4AD
2NC
• FX -8AD
2N
A-2
Voltage or
Analog input
current
special function
block, special
adapter,
expansion board
• FX
-4AD
2N
• FX
-2AD
2N
1.1 Outline and Features of Analog Control 1.1 Outline and Features of Analog Control
FX /FX
3U
A/D conversion
data
Check the flux rate using
the PLC.
Configuration Drawings of Analog Products."
→ For detailed description, refer to Section B.
→ For detailed description, refer to Section B.
→ For detailed description, refer to Section C.
→ For detailed description, refer to Section D.
• FX
2N
• FX
0N
→ For a detailed description of the other analog input
products, refer to the corresponding manuals.
1 Introduction
/FX Series PLC
3 UC 3 G
-5A
-3A