Cable And Terminal Tightening Torque; Power Cable (Fx 3Uc -4Ad - Mitsubishi FX3U-4AD User Manual

FX /FX /FX PLC User's Manual - Analog Control Edition
3G 3U 3UC
FX -4AD/FX -4AD (4-channel Analog Input)
3U 3UC
3.2

Cable and Terminal Tightening Torque

3.2.1 Power cable (FX
The power crossover cable (type "C" shown in the following table) is supplied with the FX
To connect the power cable, refer to the User's Manual - Hardware Edition of the PLC main unit.
There are 3 types of power cables as shown in the following table. Types "A" and "B" are supplied with the
main unit, and type "C" is supplied with the input extension blocks or the special function blocks for FX
Series.
Type
A Power cable for main unit
Input power cable for input
B
extension block
Input power crossover cable for
C
input extension block
The crossover cable (type "C") can skip up to 4 16-point output blocks to connect units.
If more blocks should be skipped to supply power to an input block, use cable type "B".
<Self-made power cable>
To use self-made power cables, use the following wire rods and connectors:
Wire size
Crimp-style terminal
For main unit
Housing
For input extension block
Supply the 24V DC power to FX
3.2.2 Cable (FX -4AD)
3U
The FX -4AD terminal block is designed for M3 screws.
3U
The end disposal of the cable shows blow.
Tighten the terminal to a torque of 0.5 N
• When one wire is connected to one terminal
6.2 mm (0.24")
or less
6.2 mm (0.24")
or less
• When two wires are connected to one terminal
6.2 mm (0.24")
or less
6.2 mm (0.24")
or less
-4AD)
3UC
Application
FX
2NC
FX
2NC
FX
2NC
AWG24 (0.2mm
50083-8014 (manufactured by Molex Japan Co., Ltd.)
51030-0330 (manufactured by Molex Japan Co., Ltd.)
51030-0230 (manufactured by Molex Japan Co., Ltd.)
-4AD via the power supply connector.
3UC
m to 0.8 N
•
φ3.2 (0.13")
φ3.2 (0.13")
φ3.2 (0.13")
6.3 mm(0.25")
or more
φ3.2 (0.13")
6.3 mm(0.25")
or more
Model Length
1m
-100MPCB
(3' 3")
FX
1m
-100BPCB
(3' 3")
• Input extension block for FX
0.1m
-10BPCB1
(0' 3") • Special function block for FX
Specifications/model
2
)
m.
•
Terminal
Crimp
screw
terminal
Terminal
'[Žq
Terminal Crimp
screw
terminal
Terminal
3 Wiring
3.2 Cable and Terminal Tightening Torque
-4AD.
3UC
Cable supplied with
Series PLC main unit
3UC
2NC
Series
3UC
FX Series
2NC
B-13
A
B
3UC
C
D
/
E
F
G
H
I
J