IBM BladeCenter HS22V 7871 Problem Determination And Service Manual page 223

v See Chapter 4, "Parts listing, Types 7871 and 1949," on page 41 to determine which components are CRUs and
which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
215-802-xxx Aborted the optical drive self test due to
media tray being open.
Action
1. Insert a new CD or DVD into the drive and
wait for 15 seconds for the media to be
recognized. Rerun the test. See your
BladeCenter documentation for information
about the optical drive (media tray).
2. Rerun the test. See "Diagnostic tools overview"
on page 97.
3. Make sure that the cable for the optical drive is
securely connected at both ends of the cable
and tighten any loose connections. See your
BladeCenter documentation for information
about the optical drive (media tray).
4. Make sure that the cable for the optical drive is
not damaged and replace the cable if damage
is present. See your BladeCenter
documentation for information about the
optical drive (media tray).
5. Rerun the test. See "Diagnostic tools overview"
on page 97.
6. Make sure that the DSA Diagnostic code is at
the latest level, upgrade if necessary. The latest
code can be found at http://www.ibm.com/
support/docview.wss?uid=psg1SERV-DSA.
7. Rerun the test. See "Diagnostic tools overview"
on page 97.
8. For additional troubleshooting information, go
to http://www.ibm.com/support/
docview.wss?uid=psg1MIGR-41559.
9. Rerun the test. See "Diagnostic tools overview"
on page 97.
10. Replace the CD or DVD drive (media tray). See
your BladeCenter documentation for
information about replacing the optical drive.
11. If the failure remains, collect the data from the
DSA event log and send it to IBM Service. For
information about contacting and sending data
to IBM Service, see "Hardware service and
support" on page 227.
207
Chapter 6. Diagnostics