IBM BladeCenter HS22V 7871 Problem Determination And Service Manual page 210

v See Chapter 4, "Parts listing, Types 7871 and 1949," on page 41 to determine which components are CRUs and
which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
089-803-000 CPU test aborted. Memory size is insufficient
to run the test. At least 1 GB is required.
194
BladeCenter HS22V Type 7871 and 1949: Problem Determination and Service Guide
Action
1. If the blade server has stopped responding, turn
off and restart the blade server; then, rerun the
test. See "Turning off the blade server" on page
13 and "Turning on the blade server" on page
13.
2. Run the test again.
3. If the error continues, make sure that the DSA
Diagnostic code is up-to-date, upgrade if
necessary; then, rerun the test. up-to-date,
upgrade if necessary. The latest code can be
found on the IBM support Web site at
http://www.ibm.com/support/
docview.wss?uid=psg1SERV-DSA.
4. Make sure that the system firmware level is
up-to-date, upgrade if necessary; then, rerun the
test. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component. The
latest level firmware for this component can be
found on the IBM support Web site at
http://www.ibm.com/support/
docview.wss?uid=psg1MIGR-63017.
5. If the blade server has stopped responding, turn
off and restart the blade server; then, rerun the
test.
6. (Trained service technician only) If the
component failure remains, refer to Chapter 5,
"Removing and replacing blade server
components," on page 49 to replace the failed
component.