IBM BladeCenter HS22V 7871 Problem Determination And Service Manual page 177

v Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
v See Chapter 4, "Parts listing, Types 7871 and 1949," on page 41 to determine which components are customer
replaceable units (CRU) and which components are field replaceable units (FRU).
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
Trained service technician.
Error code Description
3048006 Booted secondary (backup) UEFI image due
to ABR.
3138002 Boot configuration error.
3008000 IMM communication failure.
3008001 IMM incompatible firmware level.
3008002 Configuration update to IMM failed.
Action
1. Run the Setup utility (see "Using the Setup
utility" on page 20). Select Load Default Settings
and save the settings.
2. Follow the UEFI recovery procedure in
"Recovering from a UEFI update failure" on page
212.
1. Run the Setup utility and remove any recent
changes made to the settings (see "Using the
Setup utility" on page 20).
2. Run the Setup utility (see "Using the Setup
utility" on page 20). Select Load Default Settings
and save the settings.
1. Reseat the blade server (see "Removing the blade
server from the BladeCenter unit" on page 52
and "Installing the blade server in a BladeCenter
unit" on page 53).
2. Update the IMM firmware (see "Firmware
updates" on page 33).
3. (Trained service technician only) If the problem
remains, replace the system board (see
"Removing the system-board assembly" on page
94 and "Installing the system-board assembly" on
page 95).
1. Reseat the blade server (see "Removing the blade
server from the BladeCenter unit" on page 52
and "Installing the blade server in a BladeCenter
unit" on page 53).
2. Update the IMM firmware (see "Firmware
updates" on page 33).
3. (Trained service technician only) If the problem
remains, replace the system board (see
"Removing the system-board assembly" on page
94 and "Installing the system-board assembly" on
page 95).
1. Reseat the blade server (see "Removing the blade
server from the BladeCenter unit" on page 52
and "Installing the blade server in a BladeCenter
unit" on page 53).
2. Update the IMM firmware (see "Firmware
updates" on page 33).
3. (Trained service technician only) If the problem
remains, replace the system board (see
"Removing the system-board assembly" on page
94 and "Installing the system-board assembly" on
page 95).
161
Chapter 6. Diagnostics