Broadcom Ethernet Device Tests - IBM BladeCenter HS22V 7871 Problem Determination And Service Manual

Broadcom Ethernet device tests

Use this information to resolve Broadcom Ethernet device errors.
Follow the suggested actions in the order in which they are listed in the Action
column until the problem is solved.
v See Chapter 4, "Parts listing, Types 7871 and 1949," on page 41 to determine which components are CRUs and
which components are FRUs.
v If an action step is preceded by "(Trained service technician only)," that step must be performed only by a
trained service technician.
Error code Description
405-000-xxx Passed the EEPROM test on the system board. N/A
405-001-xxx Passed the MII registers test.
405-002-xxx Passed the EEPROM test on the system board. N/A
405-003-xxx Passed the Internal memory test.
405-004-xxx Passed the interrupt test.
405-005-xxx Passed the MAC layer loopback test.
405-007-xxx Passed LED test.
405-901-xxx Test control registers.
405-902-xxx Failed the MII registers test.
Action
N/A
N/A
N/A
N/A
N/A
1. Make sure that the component firmware level is
up-to-date, upgrade if necessary; then, rerun the
test. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component. The
latest level firmware for this component can be
found on the IBM support Web site at
http://www.ibm.com/support/
docview.wss?uid=psg1MIGR-63017.
2. If the failure remains, refer to Chapter 5,
"Removing and replacing blade server
components," on page 49 to replace the failed
component.
1. Make sure that the component firmware level is
up-to-date, upgrade if necessary; then, rerun the
test. The installed firmware level can be found
in the DSA Diagnostic Event Log within the
Firmware/VPD section for this component. The
latest level firmware for this component can be
found on the IBM support Web site at
http://www.ibm.com/support/
docview.wss?uid=psg1MIGR-63017.
2. If the failure remains, refer to Chapter 5,
"Removing and replacing blade server
components," on page 49 to replace the failed
component.
189
Chapter 6. Diagnostics