Monitor Images On A Mobile Terminal (Including Smartphones) - Panasonic WV-X6531N Operating Instructions Manual

•
The operations menu displayed on the mobile telephone screen may not be displayed depending on
the user rights and access level of the accessing user. To display the operations menu, it is necessary
to set the user rights and access level ("User auth." in "User mng."). (®page 174)
IP address is the global WAN IP address of the router that can be accessed via the Internet.
*1
1.2.2 Monitor images on a mobile terminal (including
smartphones)
It is possible to connect to the camera using a mobile terminal via the Internet and monitor images (MJPEG
or JPEG) from the camera on the screen of the mobile terminal. It is also possible to refresh images to display
the latest image.
The compatible mobile terminals are shown as follows. (As of August, 2016)
–
iPad, iPhone (iOS 4.2.1 or later)
–
Android™ mobile terminals
When an Android terminal is used, an MJPEG format image is displayed by the Firefox
format image is displayed by the standard browser.
For further information about compatible devices, refer to our website
(http://security.panasonic.com/support/info/).
IMPORTANT
•
When the authentication window is displayed, enter the user name and password.
To enhance the security, it is recommended to change the password periodically. (®page 174)
Note
•
It is necessary to configure the network settings of the mobile terminal in advance to connect to the
Internet and monitor images from the camera. (®page 180)
1.
Access to "http://IP address/cam"
mobile terminal.
→
Images from the camera will be displayed.
or "http://Host name registered in the DDNS server/cam"
*1
browser, and a JPEG
®
A
B
C
D
Operating Instructions
1 Operations
using a
*2
23