2 Monitor images on a cellular phone/mobile
terminal
2.1 Monitor images on a cellular phone
It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only)
from the camera on the screen of the cellular phone. You can also update the display to see the latest images.
IMPORTANT
•
When the authentication window is displayed, enter the user name and password. The default user
name and password are as follows.
User name: admin
Password: 12345
To enhance the security, change the password for the user "admin". (®page 139)
•
If the cellular phone in use is not compatible with UTF-8 encode, it is impossible to display the screen
correctly.
•
When "640x640", "320x320", "VGA", "QVGA", "640x360", or "320x180" is not selected one time or more
for either one of "JPEG(1)" or "JPEG(2)" of [JPEG] on the [JPEG/H.264] tab, images cannot be viewed
from cellular phones.
Note
•
It is necessary to configure the network settings of the cellular phone in advance to connect to the
Internet and monitor images from the camera. (®page 144)
•
When "Auto" is selected for "Language", the screen is displayed in English. If you want the screen to
be displayed in Japanese or Chinese, select "Japanese" or "Chinese" for "Language". (®page 62)
1.
Access to "http://IP address/mobile"
cellular phone.
→
Images from the camera will be displayed.
•
When "Quad stream" is selected for "Image capture mode", images cannot be viewed from cellular
phones.
2 Monitor images on a cellular phone/mobile terminal
or "http://Host name registered in the DDNS server/mobile" using a
*1
Operating Instructions
27