Electrical Specifications; Ac Adapter Specifications; Input Specifications; Output Specifications - Opticon OPI-3601 Specification Manual

5. Electrical Specifications

The OPI-3601 comprises 'Camera Module Section' with CMOS sensor, 'Decoder Section' for decoding
1D / 2D code data from a scanned image, 'Communication Control Section' to communicate with a host
and 'Power Supply Section' for the main power supply conversion.
The USB model is bus powered and no adapter is needed. The RS-232C and Wedge PS/2 models
need a dedicated adapter for DC 6.0 V power. Make sure not to insert and remove the power adapter
when PC is on. It may cause the PC to malfunction.
Camera Module & Decoder Section
Aiming Green LED (1)
Imaging
Lens
CMOS sensor
Illumination
Red LED (2)
5.1.

AC Adapter Specifications

For RS-232C and Wedge PS/2 models

Input Specifications

5.1.1.
Power supply voltage
Power supply frequency
Maximum current

Output Specifications

5.1.2.
Output voltage
Power ripple
5.2.

Wedge PS/2 Power Supply (Host)

Input power supply voltage
Range of working voltage
Power ripple
Current consumption
* Current consumption from the main power supply in standby state: 75 mA (max)
* Current consumption from the main power supply during reading operation: 300 mA (max)
* Keyboard operation is possible when the main power supply is off.
* The current consumption was measured at 25°C.
5.3.

USB Power Supply

Bus-Power Class
Current consumption
* The current consumption was measured at 25°C.
Communication Control Section
1.3V 3.3V
Status LED
CPU +
FROM/SDRAM
Trigger
Figure 2: Configuration Diagram
: AC 90 ~ 265 V
: 47 ~ 63 Hz
: 0.5 A (max)
: 6.0 V ±5% / Output current: 0 ~ 2.0 A (max)
: 100 mVp-p (max, rated load)
: DC 5.0 V
: 4.5 ~ 5.5 V
: 100 mVp-p max (10 ~ 100 kHz, power supply voltage 5.0 V)
: 100 mA (max) without main power supply (AC adapter)
: Hi-Power (500 mA max)
: 75 mA (max) in stand-by mode
: 300 mA (max) during reading operation
6
Specifications Manual
3.3V +5.0～6.0V
Power Supply Section
Buzzer
Magnet
I/F
sensor
(RS-232C/USB
/Wedge)
button
Interface Section
OPI-3601
+6.0/5.0V
AC adapter
/Host
Host
Keyboard
(Wedge)