Wedge Ps/2; How To Connect; Caution - Opticon OPI-3601 Specification Manual

8.3.

Wedge PS/2

How to Connect

8.3.1.
・Connect the branch cable (without label on, 6-pin Mini-DIN female) to the OPI-3601
Wedge PS/2 interface cable connector (6-pin Mini-DIN male).
・Connect the branch cable connector (6-Pin Mini-DIN male) to the host keyboard
connector.
・Connect the other branch cable connector (with DOS/V KEY label on, 6-pin Mini-DIN,
female) to the keyboard.
・Insert the AC adapter plug to the DC jack of the interface cable and start the host
computer.

Caution

8.3.2.
・Do not operate on the keyboard during the data transmission to the host or the data
transmission may fail.
・The keyboard can operate without connecting to the AC adapter when this device is not
used. However, do not turn ON or OFF the adapter while operating on the keyboard. It
may cause malfunctions.
・Images cannot be transmitted via this Wedge PS/2 interface.
・Multi byte character data can be transmitted via this Wedge PS/2 interface with settings.
・Do not start any scanning operation or keyboard operation before the OS of the host
computer is fully activated.
19
OPI-3601
Specifications Manual