Usb; Usb Interface Specifications; Connector; Usb Interface Circuit - Opticon OPI-3601 Specification Manual

8.2.

USB

The USB interface models have two specifications: HID (Human Interface Device Class) and
COM (Communication Device Class). With USB-COM model, VCP (Virtual Communication Port)
allows virtual serial communication and the commands can be transmitted from the host computer.
* Multi byte character data or images can be transmitted via USB-COM interface.

USB Interface Specifications

8.2.1.
Power supply : 500mA (High-power)
Speed : USB2.0 Full-speed (12 Mbps)
Interface : USB-HID / USB-COM (VCP)
* The USB model is
* Images cannot be transmitted via the USB-HID interface.
* Multi byte character data can be transmitted via USB-HID interface with settings. .
* Make sure to connect to a High-power bus (500 mA) USB terminal.

Connector

8.2.2.
Pin No.
1
2
3
4

USB Interface Circuit

8.2.3.
bus powered and no AC adapter is required.
Figure 13: USB Plug (A)
Signal name
V bus
Data ( － )
Data ( ＋ )
GND
Figure 14: Interface Circuit (USB)
18
OPI-3601
Specifications Manual
Note