Detailed View - Opticon OPI-3601 Specification Manual

4. Detailed View

2
No Name
1 Trigger Key
Scanning Window Light paths of the imager, LED illumination and LED aiming. Ensure that
2
3 Status LED
4 Buzzer Hole
1
Figure 1: Detailed View of OPI-3601
By pressing this key, the scanner starts taking an image from the scanning
window and LED illumination is emitted to read 1D/2D codes.
the lens is not exposed to dust and dirt before scanning.
The operating statuses are indicated by different colors.
A sound from a built-in buzzer comes out through these holes. When they
are covered, the buzzer sound may not be able to be heard. The sound
varies depending on the status. Buzzer settings can be configured in
various ways: enable or disable buzzer as well as change the loudness and
duration.
5
Specifications Manual
3
4
Description
OPI-3601