Error Messages - Meiko EcoStar 545 D-M Operating Instructions Manual

Operating instructions EcoStar 545 D-M
Datei:1_EcoStar545D-M_9654091_Betriebsanleitung_EN_2007-07.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
16.1.1.3 Empty indication partial demineralisation cartridge (option):
The lights in the boiler temperature display (right) will flash if the cartridge is empty.
This indication will not be automatically cancelled when the cartridge is changed.
This must be done manually as described in the Short Programming Manual.

16.2 Error messages

16.2.1 The tank temperature display (on the left) remains dark
The pre-set wash water temperature is not reached in the time allowed. The cause
can be a defective tank heating element or tank temperature sensor.
Please notify the service engineer.
16.2.2 The boiler temperature display (on the right) remains dark
The pre-set rinse water temperature is not reached in the time allowed. The cause can
be a defective boiler heating element or boiler temperature sensor.
Please notify the service engineer.
16.2.3 Both temperature displays remain dark
This can indicate that the water supply from the building has been cut off or that the
screen in the inlet valve is dirty. It is impossible to fill the wash tank.
Notify the service engineer if the malfunction cannot be remedied by opening the
water supply line or by cleaning the screen.
16.2.4 All displays remain dark
There is no power.
Switch the main switch in the building or the main safety devices on.
If this does not rectify the fault, operation in emergency mode will no longer be
possible.
Please notify the service engineer in all cases.
Update: 2007-07-23
W e reserve the right to change execution and construction!
9645091 26/30