Meiko EcoStar 545 D-M Operating Instructions Manual page 31

SHORT OPERATING INSTRUCTIONS EcoStar 545 D-M
1. Preparing to wash and rinse
Open the hood.
Insert suction sieve and tank covering sieve.
Close the hood.
Switch on the appliance by pressing one of the program pre-selection
keys or press down the hood rod.
Check level and if necessary refill detergent and rinse aid
reservoirs.
The machine is ready for operation when flash light of pre-selector
button stops.
2. Washing and rinsing
Place the material to be washed in the basket.
Insert the basket in the machine.
Close the hood.
Program I for lightly soiled dishes.
Program II for normal soiled dishes.
Program III for heavily soiled dishes.
Press the program start button or press down the hood rod.
The machine automatically washes, rinses and switches itself off when
the wash program is finished. Open the hood after the lamp on the
program start button goes out and remove the basket.
3. Shutting the machine down
Press the "0" button (Off button). The machine is switched off when all
the lights are out.
Open the hood and remove the stand-pipe.
If the appliance has a built-in waste water pump, the program start
button must be pressed to empty the tank.
After the tank water has been pumped out, the interior is rinsed with
fresh hot water. The hood must be kept closed. The waste water pump
disconnects itself automatically.
Clean tank, strainers and wash arms
Control panel