Trouble-Shooting; Information Reporting And Troubleshooting - Meiko EcoStar 545 D-M Operating Instructions Manual

Operating instructions EcoStar 545 D-M
Datei:1_EcoStar545D-M_9654091_Betriebsanleitung_EN_2007-07.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
16

Trouble-shooting

Despite being expertly designed, the machine may develop minor faults which are usually
easy to eliminate. This section explains a number of possible problems and how you can
deal with them yourself.
Before carrying out work on the open appliance, it MUST be disconnected from the
power supply. The local main switch must be switched "OFF", or the local main fuse
must be removed.
Should any of the operational faults described arise repeatedly, their cause must be
established in each case.
Faults not described here can in general only be eliminated by a technician or
electrician. Please contact the agency responsible or the authorised dealer.

16.1 Information reporting and troubleshooting

Only in case of a built-in
water softener (EW):
Tank temperature
LED display for information and trouble reporting
16.1.1 Information re porting
16.1.1.1 Incorporated softener exhausted
If the red lamp lights up, the capacity of the water softener has been almost
exhausted. About a further 10 program cycles are possible before the water softener
is completely exhausted.
Carry out the regeneration procedure as described in the Operating Instructions.
16.1.1.2 Empty indication detergent/rinse agent (option):
If suction lances with conductivity sensors have been installed in the storage
containers for detergent and / or rinse agent, the lights of the tank temperature display
(left) will flash if one of the containers is empty. The empty indication will be
automatically cancelled when liquid is recognised in the relevant storage container.
Update: 2007-07-23
W e reserve the right to change execution and construction!
"Washing" key
Boiler temperature
"Off" key
9645091 25/30