Staff Training; Authorized User Of This Documentation; Settings / Modifications / On-Site Adaptation; Using The Keyboard For Programming - Meiko EcoStar 545 D-M Operating Instructions Manual

Operating instructions EcoStar 545 D-M
Datei:1_EcoStar545D-M_9654091_Betriebsanleitung_EN_2007-07.doc
MEIKO Maschinenbau GmbH & Co. KG, Postfach 2040, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
13

Staff training

Only trained and instructed personnel are allowed to work on the dishwashing machine.
Staff responsibilities for the installation's operation, maintenance and repair must be
clearly defined.
Any personnel undergoing training are only allowed to work on the dishwashing machine
installation under the supervision of an experienced person.
persons
Activity
Installation and assembly
Commissioning
Operation, use
Cleaning
Checking safety devices
Fault finding
Troubleshooting,
mechanical
Troubleshooting,
electrical
Maintenance
Repairs
Training should be recorded in writing.
14

Authorized user of this documentation

The works described in this booklet (chapter 14 - 18) may only be carried out by
specialists of the manufacturer, the responsible agency or an authorized dealer.
15

Settings / modifications / on-site adaptation

15.1 Using the keyboard for programming

Increase value/
move forward
move backwards
LED display for parameterisation
For control programming, the power supply must be available but the machine must be
completely switched off (no LED must be illuminated).
Update: 2007-07-23
W e reserve the right to change execution and construction!
Trained operating
personnel
Decrease value/ Accept /
modify
Trained Trained in-house
in-house technician or
technician installation engineer
Exit / Start
Programming
9645091 21/30