Parameterisation; Entry To The Parameterisation Level; Error Messages; Error Messages - Washing Not Possible - Meiko K160 Operating Instructions Manual

Operating Instructions - Control MIKE 3 - CE
Datei:BA_MIKE3-CE_KUNDE_9652929_EN_2008-06.docx
MEIKO Maschinenbau GmbH & Co. KG, Englerstr. 3, D-77652 Offenburg, Tel.: +49/781/203-0, Fax: +49/781/203-1174
4.2

Parameterisation

4.2.1 Entry to the parameterisation level

The starting point is the operating condition display e.g.
Operation
WT1 65°C KSP1 82°C
Press the arrow key and the following will appear in the display:
INFORMATION
PARAMETERISATION
Parameterise
Please enter code
The cursor will be seen on the first figure (0 appears and flashes).
Only authorised service personnel are allowed in this area!
5

Error messages

5.1

Error messages - washing not possible

Text in display
Description
Display dark
Emergency stop switch has been pressed or main switch out
Water level not reached when the tank was filled for the first time;
Error number 201
Float soiled
First fill error
Stand pipe was not inserted
Dirt trap blocked
Water flow from the building too low
Water level in wash tank not reached on refilling;
Error number 202
Float soiled
Refill error
Stand pipe was not inserted
Dirt trap blocked
Water flow from the building too low
Basket transport rail is sluggish
Error number 701
The wash items is stuck in the transport mechanism
Conveyor overload
In such a case the malfunction must be promptly rectified. To continue working, the
machine must be restarted by pressing the "Filling / Heating" key.
W e reserv e the right to change execution and construction!
0****
Update:2009-12-19 MRL
9652929 12/14