Lenovo Flex System x280 X6 Compute Node Installation And Service Manual page 345

Automatically notify Support: Yes
User response: Complete the following steps until the problem is solved:
1. Make sure that the cable from the light path LED card to the system board is securely connected.
2. Replace the light path diagnostics panel.
806f011b-1f03ffff The connector [PhysicalConnectorElementName] has encountered a configuration error.
Explanation: The connection of the SAS backplane 1 and the planar are not complete
May also be shown as 806f011b1f03ffff or 0x806f011b1f03ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0266
SNMP Trap ID: 50
Automatically notify Support: Yes
User response:
1. Check the SAS backplane 1 is connected completely to main system planar.
2. Check that disk is completely inserted in connector.
806f011b-1f04ffff The connector [PhysicalConnectorElementName] has encountered a configuration error.
Explanation: The connection of the SAS 2 backplane and the planar are not complete
May also be shown as 806f011b1f04ffff or 0x806f011b1f04ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0266
SNMP Trap ID: 50
Automatically notify Support: Yes
User response:
1. Check the SAS backplane 2 is connected completely to main system planar.
2. Check that disk is completely inserted in connector.
806f0123-2101ffff Reboot of system [ComputerSystemElementName] initiated by [WatchdogElementName].
Explanation: The IPMI watchdog timer has expired. The compute node has restarted.
May also be shown as 806f01232101ffff or 0x806f01232101ffff
Severity: Info
Alert Category: System - Other
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0370
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
806f011b-1f03ffff • 806f0123-2101ffff
Chapter 6. Troubleshooting
333